KFD Pro version knuckles for Mark2 Chaser Cresta X90 X100 X110 Crown S170 Altezza SXE10 Altezza Gita GXE10 JCE10 Lexus IS200 IS300

KFD Pro version knuckles, steel, turnout 45-50 degrees. Optimum recommended camber angle for front suspension 4-5 negative degrees.

 High quality steel AISI 1045

 CNC in-house manufactured

 Powder coated

 Turnout 45-50 degrees, depending on the settings of the angles of the suspension

 Bolts are included (grade 10.9 - alloy steel, quenched and tempered)

 Positive Ackermann

Installation time: 1 to 1.5 hours

Requires modification of the lower OEM ball joint by grinding off the track rod pickup

Highly recommended to use with 30 mm extended Front lower control arms

For more precise adjustment, we recommend installing KFD Front Upper Control Arms

Optimum recommended camber angle for front suspension 4-5 negative degrees

Alignment recommended after installation
Tightening torque for 12mm supplied bolt is 83 ft-lbs (113 Nm)
Use medium-strength thread locker to prevent loosening up the bolt (not included due to customs regulation)

INSTALLATION NOTE

KFD Team is NOT responsible for damage to knuckles and suspension from being installed incorrectly. Installation / removal REQUIRES specialized tooling, please make sure your installer service center is properly equipped to handle this process.

If you have any questions, please do not hesitate to contact us

Made in Siberia | Worldwide Shipping